Mechanical Knowledge

6 tips in the processing of CNC lathes

The processing technology of CNC lathes is similar to that of ordinary lathes, but because CNC is a one-time clamping and continuous automatic processing to complete all turning processes, the following aspects should be paid attention to.

1. Reasonable choice of cutting amount in the processing of CNC lathes

For high-efficiency metal cutting processing, the processed material, cutting tools, and cutting conditions are the three major elements. These determine the processing time, tool life and processing quality. The economical and effective machining method must be a reasonable choice of cutting conditions.

The three elements of cutting conditions: cutting speed, feed rate and depth of cut directly cause tool damage. With the increase in cutting speed, the temperature of the tool tip will rise, which will cause mechanical, chemical, and thermal wear. Increasing cutting speed will reduce tool life by 1/2.

The relationship between the feed condition and the wear on the back of the tool occurs in a very small range. But the feed rate is large, the cutting temperature rises, and the back wear is large. It has less influence on the tool than cutting speed. Although the influence of cutting depth on the tool is not as large as the cutting speed and feed rate, when cutting at a small depth of cut, the material being cut will produce a hardened layer, which will also affect the life of the tool.

The user should choose the cutting speed to be used according to the processed material, hardness, cutting state, material type, feed rate, and depth of cut. The most suitable processing conditions are selected on the basis of these factors. Regular, stable wear and longevity are the ideal conditions. However, in actual operations, the choice of tool life is related to tool wear, dimensional changes to be processed, surface quality, cutting noise, and processing heat. When determining the processing conditions, it is necessary to conduct research according to the actual situation. For difficult-to-process materials such as stainless steel and heat-resistant alloys, coolants or blades with good rigidity can be used. Two: Choose a tool reasonably

1). When roughing, choose a tool with high strength and good durability to meet the requirements of large back-grabbing and large feed when roughing.

2) When finishing turning, choose high-precision and durable tools to ensure the requirements of machining accuracy.

3) In order to reduce the time of tool change and facilitate tool setting, machine clamped knives and machine clamped blades should be used as much as possible.

CNC lathes

2. Reasonable selection of fixtures in the processing of CNC lathes

1)Ttry to use general fixtures to clamp the workpiece, avoid using special fixtures;

2) The part positioning datum coincides to reduce positioning error.

3. Determine the processing route CNC lathes

The processing route is the movement track and direction of the tool relative to the part during the processing of the index control machine tool.

1). It should be able to guarantee the processing accuracy and surface roughness requirements;

2). The processing route should be shortened as much as possible to reduce the tool idle travel time.

CNC lathes

4. The connection between processing route and processing allowance in the processing of CNC lathes

At present, under the condition that the CNC lathe has not reached the popular use, the excess margin on the blank, especially the margin containing the forged and cast hard skin layer, should be arranged on the ordinary lathe for processing. If you must use a CNC lathe to process, you need to pay attention to the flexible arrangement of the program.

CNC lathes

5. Main points of fixture installation in the processing of CNC lathes

At present, the connection between the hydraulic chuck and the hydraulic clamping cylinder is realized by a tie rod. The key points of hydraulic chuck clamping are as follows: first use a moving hand to remove the nut on the hydraulic cylinder, remove the pull tube, and pull it out from the rear of the spindle, and then use the moving hand to remove the chuck fixing screw to remove the chuck.

The wiper on the tool refers to a small segment of the blade parallel to the tip of the tool that is ground in the direction of the secondary deflection angle behind the blade of the tool. It is mainly used for a secondary cutting after the cutting of the blade. Improving the surface roughness of the workpiece is mostly used for finishing tools.

PREVIOUS:The Whole Process of Milling Machine Operation
NEXT:8 metal brothers, each has a temper